Description

Water Save Kitchen Tap Aerator – 4 liters per minute (LPM) – Spray / shower flow pattern (WS-S4)

Water Saving Aerator for taps from Greenly range of products gives very good results in saving water for both commercial as well as residential Tap installations.

faucet aerator (or Tap aerator) is often found at the tip of modern indoor water Taps / faucets. Aerators can be simply screwed onto the faucet head, creating a non-splashing stream and often delivering a mixture of water and air and  act as a water saving aerator for tap.

Water Saving aerators for Taps come in the form of mesh screens that divide the flow of water into multiple small streams by adding air in between. The volume of water flowing from the tap gets appreciably reduced as the water stream is diluted with air. This results in water savings and minimize splashing in sinks.

Normal Aerators will not restrict the flow of water and the water flow is directly proportional to the pressure of the water line. so, Normal Aerator dispense anywhere between 8 liters per minutes to 15 liters per minute. but water saving aerators are designed to save water.

Water Saving Aerator for tap has following advantage.

  •  Prevent water splashing out of Kitchen Sinks.
  •  Shape the water stream coming out of the faucet spout, to produce a straight and evenly pressured stream.
  • Conserve water and reduce energy costs.
  • Reduce faucet noise.
  • Increase perceived water pressure (often used in homes with low water pressure); sometimes described as a pressure regulator or flow regulator.
  • Provides filtration of debris.

Greenly Kitchen Tap Water saver aerators (WS-S4) has following advantages:

  • Saves around 50% compared to normal aerators.
  • Best suitable for Kitchen taps and places where the water requirement is bit higher.
  • Made up of Poly-Oxy-Methelene, an Engineering plastic.
  • anti-clogging filter screen filters sediments and particles.
  • perfect flow quality even under different flow conditions.
  • fulfills all standard requirements.
  • Reduce Energy bills.
  • Extended life.
  • very low noise level.
  • Easy installation and maintenance.
  • Economical and Best Return on Investment.
Output LPM  4 LPM
Flow patterns Shower / Spray
Method of Construction Poly-Oxy-Methelene (An Engineering Plastic)
Suitable for 22 mm Diameter threaded shells(M24/F24 threaded taps)
Operating Pressure 0.8 bar to 4 bar.

 

Gives best results for

  • Kitchen sink taps
How can I help you?