100 in stock
PRICE INDICATED INCLUDES GST/IGST @ 18%
Air Atomizing Nozzles deliver an unique internal design that makes it possible for the liquid and air to mix internally producing a fine or coarse drops atomized spray.
Basically, obtaining fine atomization is done by increasing the air pressure or lowering the liquid pressure, resulting in a high ratio of air flow rate to liquid flow rate.
In the vast majority of industrial processes, air atomizing Nozzles are being used, where compressed air supplies the required energy for atomizing the liquid.
Pressure spray: through the liquid pressure will supply nozzle, liquid and gas compressed air in internal mixing, resulting in a fully atomized spray.
Internal Mixture jet Air Atomizing Spray Nozzle
Internal mixing Air Atomizing spray nozzles – Liquid and air mixed together within nozzle and dispensed through a single orifice. A change in air flow will affect the liquid flow. This makes precise metering of the liquid more difficult than with an External Mix Set-up. Internal Mix set-up are able to produce the finest atomization, but they are generally not suitable for use with liquids which have a higher viscosity.
This Air atomizing nozzle flow like a jet spray nozzle pattern. This is not a straight jet spray nozzle pattern (where the jet stream with a spray angle of 0 degree) but a full cone shaped water flow.
All Internal mixing Air Atomizing spray nozzles can works up to viscosity of 250 cP. Internal mix nozzles are available in three patterns: narrow angle round pattern, wide angle round pattern and flat fan pattern. we have 1/4 models and made up of SS316 material.
Other materials available are brass, SS304 and Duplex steel or based on customer requirements.
Specification of Air Atomizing Spray Nozzles Internal Mixture:
|Liquid Cap orifice diameter||0.5 mm|
|Connection Size||1/4″ Inch NPT|
|Size of Square body||22 mm|
|Other materials||Brass (Chrome Coated), Duplex Steel|